5 Tips to Put Truck Bed Liner Paint on the Right Way

Truck bed liner paint makes old raggedy truck beds look new again. Save a bunch of dough and get a better looking pickup at the same time. Here's how... And Why...

1. Save hundreds.
Who wants to spend big money on an expensive bed liner, especially if you have an old truck. Do it yourself and save a pile of money. The trick is in the special paint. It has rubber texture in it and it sticks like crazy...

2. Roll or spray.
You can spray on a liner yourself or roll the paint on. The trick is the paint is so thick, after it dries a roll on coating looks like it was sprayed on anyway.

3. Prep simple.
Key to a long lasting finish is getting the old bed paint scratched up really good. That way the new paint sticks just right. All you have to do is use really coarse abrasive and just rough that old paint up good. The more you scratch it up the better. That's the key to a good stick.

4. Looks like a pro liner.
Here's the deal. If you have a really rough looking truck bed, bedliner paint can make it look like you just got yourself a professional liner. It isn't the same though. Why? The professional liner is a different material and it's much thicker. Depending on how you use your truck, bed liner paint may be just about as good and a whole lot cheaper.

5. Get another quart.
A gallon of paint isn't enough. Get another quart at least. Two gallons for a truck bed is even better.

Make your pickup look better with a fresh coating of bed liner paint. You can save a pile of money compared to a professional coating. You'll be amazed what it does for the looks of old, beat-up truck beds.

How to Spray Paint Your Car & Restore Its Paint Job - Automotive Paint Spray

Car paints deteriorates and wear away over time and it can be explained in sync with the natural oxidation process which causes deterioration of paint, pollution and UV light. You could do certain things to restore the paint on your car like washing your car thoroughly on a regular basis, polishing (will remove haze, fills in the surface and maintains a glossy surface), the top layer of oxidized paint should also be cleared as it can damage more area.

Facts about Spray texture

Spray texture also called as "popcorn finish" is a paint-like coating used for painting cars. The texture comes from Styrofoam or polystyrene mixed into a sticky liquid base. The product is purchased dry and is available in various textures. Amount of water used is important as too little water and you have a paint that will not spray smoothly, too much water and it tends to show small cracks as it dries. Paint's hiding ability and adhesion will decrease with the level of water in the mix, so it is critical to have a right amount of water in the mix for sound, long lasting finish.

To assure strong adhesion of the texture, cleaning and priming the surface is very important, the purpose of cleaning is clear from the fact that paint will stick to the dust instead of the surface.

You can go for one or multiple coats, though thick single coat is not advisable. If you are thinking of having a second coat it should be allowed to dry overnight also be sure to thoroughly cover thing's you don't want the texture on or in.

If your surface has a lot of scratches and dents a less than perfectly smooth paint texture is actually desired otherwise if the paint is smooth and shiny- you'll see every scratch and dent in the surface, so in the cases of cars with lots of scratches, it is best to mist the paint slightly by putting on lighter coats that don't self-level so much. Don't spray the paint on too heavy, it will be smooth & runny which means you'll have drips on vertical surfaces.

If you done it correctly, the paint will "SELF-LEVEL"-- the surface will "run together" and will look wet and create a smooth surface, which will require no or little sanding if you are going for a glassy smooth surface look.